Incredible fast preparing

More than half of the 48 million vehicles registered in Germany have dents and dings that you can easily and profitably remove with paint damage-free dent removal technology. With dent removal as an additional service, you increase customer loyalty and attract new customers to your business.

The bonding technique is ideal for damage to the sill, side panel, hood or rear section. Up to 80 % of the deformation can thus be restored in an extremely short time.

CBR
Adhesive technology

Sensational results after only 10 minutes!

Round deformations without body edges are pulled flat by the large-area connection of the adhesive pads to the sheet metal. This allows the material to be massaged out even softer and more gently.

The adhesive technology perfectly complements existing pull components and the CBR PushPull system. The adhesive set usually pays for itself when the first damage is repaired thanks to the time saved.

CBR Easytool bonding technology set

CM-040

Exact control of very high tensile forces on large surfaces.

With the “small” CM-040 adhesive set, damage patterns can be repaired in a controlled manner with existing CBR traction devices without damaging the paintwork.

Plastic tension bolts and special pads are used, which provide a sufficient connection to the surface with heated special plastic adhesive. After removing the damaged areas, the adhesive is removed from the painted surface without leaving any residue.

CBR adhesive technology set

MKS-100

gluetech plus white

MGT-400

Precise control of very high tensile forces over large areas.

The bonding technique is particularly suitable for damage to the sill, side panel, hood or rear section. Up to 80 % of the deformation can thus be restored in an extremely short time.

The adhesive technology perfectly complements existing pull components and the CBR PushPull system. Due to the high time savings, the bonding technology usually pays for itself when the first damage is repaired.

Carbon Klebetechnik Anwendung

Die einfache Anwendung der Carbon Klebetechnik.
Damit kommen Sie jetzt noch schneller ans Ziel.

Den Spezial-Reiniger auf ein weiches Tuch geben.
Die Oberfläche des Klebepads reinigen.
Für eine optimale Klebewirkung muss der Schadensbereich gründlich gereinigt werden.
Den Kleber raupenförmig dick auftragen.
Pad aufsetzen, andrücken und abkühlen lassen.
CBR Zuggeröt ansetzen.
Gefühlvolle, dosierte Rückverformung mit den MIRACLE-Komponenten. Auf Zug halten und Restspannung durch Abklopfen mit AluTitan-Hammer lösen.
Zum Ablösen der Pads etwas Reiniger in den Randzonen kurz einwirken lassen.
Entfernen der Pads mit dem im Set enthaltenen Kunststoffkeil.
Kleber abziehen, die Pads sind wiederverwendbar.

Carbon Klebetechnik-Set Easytool

Lieferumfang CM-040

Stück
Artikelnummer
Lieferumfang
1x
CKS-304
Koffer mit Inlay
1x
CKS-302-AOL
Reiniger (250 ml)
1x
CKS-307
Spezialkleber, silber (250 g)
1x
CGP-902
Spezialkleber, beige (250 g)
1x
CM-042
Adapter für EasyTool
1x
CZ-112
Teflon-Schlagwerkzeugset
1x
CZ-200
Klebetab-Set, blau (11 Größen)
1x
1x
CKS-303
Klebepistole Gluematic

Alle Artikel sind auch einzeln erhältlich.

Klebepad-Set für Klebetechnik-Set Easytool

Klebepads cks-10200

6 verschiedene Größen, blau

Stück
Artikelnummer
Lieferumfang
1x
CKS-10258
Klebepad Gr. 1, Ø 10 mm
1x
CKS-10259
Klebepad Gr. 2, Ø 13 mm
1x
CKS-10260
Klebepad Gr. 3, Ø 16 mm
1x
CKS-10261
Klebepad Gr. 4, Ø 22 mm
1x
CKS-10262
Klebepad Gr. 5, Ø 16 x 32 mm
1x
CKS-10263
Klebepad Gr. 5, Ø 16 x 32 mm

Klebepads cks-309

6 verschiedene Größen, blau

Stück
Artikelnummer
Lieferumfang
1x
CKS-312-a
Klebepad Gr. 1, Ø 15 mm
1x
CKS-313-a
Klebepad Gr. 2, Ø 20 mm
1x
CKS-314-a
Klebepad Gr. 3, Ø 25 mm
1x
CKS-315-a
Klebepad Gr. 4, Ø 30 mm
1x
CKS-316-a
Klebepad Gr. 5, oval, Ø 30 x 50 mm

Schreiben Sie uns

Carbon Klebetechnik-Set

Lieferumfang MKS-100

Stück
Artikelnummer
Lieferumfang
1x
MKS-101
Koffer mit Inlay
2x
CGP-902
Spezialkleber, beige (250 g)
2x
B-200
Klebepad-Set blau, mittel
1x
S-300
Klebepad-Set schwarz
1x
CKS-302
Reiniger (250 ml)
CKS-302b
Reiniger (500 ml)
CKS-302c
Reiniger (1.000 ml)
2x
CGP-902
Spezialkleber, beige (250 g)
1x
CKS-303
Klebepistole Gluematic
1x
CZ-200-22
Kunststoffmeisel 22 mm

Alle Artikel sind auch einzeln erhältlich.

Klebepad-Set für Carbon-System

Flexible Pads  |  B-200
für normale und weiche Verformungen

Artikel-Nr. Beschreibung
B-200 blau

Klebepads einzeln, blau

Glasfaserverstärkte Pads  |  S-300
für Rückverformung an harten und zähen Bereichen

Artikel-Nr. Beschreibung
S-300 schwarz

Klebepads einzeln, schwarz

Carbon KLEBEKIT GLUETECH PLUS

Lieferumfang MGT-400

Stück
Artikelnummer
Lieferumfang
1x
MGT-401
Koffer mit Inlay
1x
MGT-10
GlueTech Verbindungsplatte
3x
MGT-11
GlueTech Zugleiste blau
3x
MGT-12
GlueTech Schraube für Verbinundsplatte / Zugleiste
3x
MGT-200
GlueTech Klebepad-Set blau mit 5 verschiedenen Pads
1x
CZ-200-22
Kunststoffmeisel, 22 mm
1x
CKS-302
Reiniger (250 ml)
CKS-302b
Reiniger (500 ml)
CKS-302c
Reiniger (1.000 ml)
2x
CGP-902
Spezialkleber, beige (250 g)
1x
CKS-303
Klebepistole Gluematic
1x
CZ-200-22
Kunststoffmeisel 22 mm

Alle Artikel sind auch einzeln erhältlich.

Klebepad-Set für GlueTech Plus

Gluetech plus Klebepad-Set blau | mgt-200

Artikel-Nr. Beschreibung
MGT-05 5 Zugösen
MGT-04 4 Zugösen
MGT-03 3 Zugösen
MGT-02 2 Zugösen
MGT-01 1 Zugöse

Klebepads einzeln

Zubehör

MGT-11 GlueTech Plus Zugleiste blau (3x)
MGT-10 GlueTech Plus Verbindungsplatte

AOL Basis-Zubehörset

Scheiben­abschirmblech

Artikel-Nr.
CZ-101

Expander mit S-Haken, 2 Stk.

Artikel-Nr.
CZ-102

Hauben­teleskope, 2 Stk.

Artikel-Nr.
CZ-103

Ketten mit S-Haken/Ring

Artikel-Nr.
CZ-104

Hammer, 200 g

Artikel-Nr.
CZ-105

Dachlager

Artikel-Nr.
CZ-106

Nylonaufsätze, 4 Stk.

Artikel-Nr.
CZ-107, Ø 11 mm

Wachsstifte, 4 Stk.

Artikel-Nr.
CZ-111

Teflon-Schlag­werkzeug, 3 St.

Artikel-Nr.
CZ-112

Scheiben­schachtkeil

Artikel-Nr.
CZ-113

C4 Kriechwachs

Artikel-Nr.
CZ-117

Gewebeband

Artikel-Nr.
CZ-119

2000er Finishklotz
mit Behälter

Artikel-Nr.
CZ-120

Spezial-Finishtuch

Artikel-Nr.
CZ-123

Multifunktions­lampe

Artikel-Nr.
CZ-126 (inkl. bei CBS-001, CPS-005 und CXL-006)

LED-Lampe

Artikel-Nr.
CZ-160 (inkl. bei CBS-002, CPS-006 und CXL-007)

CARBON Werkzeugkoffer

Artikel-Nr.
CZ-128

CARBON Zubehörkoffer

Artikel-Nr.
CZ-129

Drehhocker, höhenverstellbar

Artikel-Nr.
CZ-130 (inkl. bei Profi- und XL-Profi-Set)

Miracle Gluing Technology Usage

The easy application of the Miracle gluing technique. Now you can reach your target even faster.

Put the special cleaner on a soft cloth.
Clean the surface of the gluing pad.
For optimum effect, the damage area must be thoroughly cleaned.
Apply the glue thickly.
Put the pad, press and let cool down.
Place the MIRACLE puller.
Gently, controlled re-deformation with the MIRACLE components. Hold on to tension and release residual tension by tapping with the AluTitan hammer.
In order to detach the pads, leave some cleaners in the edge zones for a short time.
Removing the pads with the included plastic wedge.
Remove the glue, the pads are reusable.

Carbon Gluing Technology Set

Scope of delivery MKS-100

Anzahl Artikel-Nr. Beschreibung
1x CKS-304 Koffer
2x CGP-902 Spezialkleber
1x CKS-302 Reiniger (250 ml)
1x CKS-303 Klebepistole Gluematic
2x B-200 Klebepad-Set blau / mittel
1x S-300 Klebepad-Set schwarz / hart
1x CZ-122b Kunststoffkeil zum Lösen von geklebten Pads

All items can also be ordered individually.

Carbon Gluing Kit GlueTech Plus

Scope of delivery MGT-400

Anzahl Artikel-Nr. Beschreibung
1x MGT-401 Koffer
2x CGP-902 Spezialkleber
1x CKS-302 Reiniger (250 ml)
1x CKS-303 Klebepistole Gluematic
3x MGT-200 GlueTech Plus Klebepad-Set blau
1x MGT-10 GlueTech Plus Verbindungsplatte
3x MGT-11 GlueTech Plus Zugleiste blau

All items can also be ordered individually.

MGT-11 GlueTech Plus Drawbar blue (3x)
MGT-10 GlueTech Plus Connecting Plate
MGT-200 GlueTech Plus Gluing Pads blue (3x)

Absage Schulungstermine | Corona

Kurz nach dem Besuch des ersten größeren Branchenevents nach dem Lockdown ist einer unserer Mitarbeiter erkrankt und wir stehen teilweise unter Quarantäne. Obwohl wir bereits ein Hygienekonzept erarbeitet und Schulungen unter Corona-Bedingungen durchgeführt haben, sagen wir bis Ende des Jahres alle Trainings ab, denn aufgrund der aktuellen Situation und der Einschätzung der Experten müssen wir mit weiter steigenden Fallzahlen rechnen. Die Gesundheit Ihrer und unserer Ihrer Mitarbeiter liegt uns zu sehr am Herzen, um hier ein unnötiges Risiko eingehen zu wollen. Denn wo sich mehrere Teilnehmer aus unterschiedlichen Betrieben und aus verschiedensten Regionen des Landes über längere Zeit treffen, ist nicht auszuschließen, dass es zu einer Ansteckung kommen könnte und jemand das Virus eventuell unbemerkt in seinem Betrieb an Dritte weitergibt.

Wir haben uns deshalb entschlossen, alle geplanten Schulungen auf unbestimmte Zeit zu verschieben.

Aktuell arbeiten wir an Live-Schulungen bzw. Video-Trainings und werden Sie informieren, sobald die ersten Termine feststehen. Selbstverständlich kontaktieren wir Sie auch mit entsprechenden Terminvorschlägen sobald wir wieder Schulungen in unserem Trainingszentrum anbieten. 
Bleiben Sie gesund!

Edeltraud Holle & Siegbert Müller
Geschäftsleitung Carbon GmbH

CBR Components

CBR Strong-Tool Item-ID: CBR-ST-00

Single foot for CBR Strong-Tool Item-ID: ST-30

Double foot for CBR Strong-Tool Item-ID: ST-60

Extension for CBR Strong-Tool Item-ID: ST-80

CBR EasyTool Item-ID: CBR-ET-00

Feet for CBR EasyTool

CBR LineTool 160 Item-ID: CBR-LT-00

Single foot for CBR LineTool Item-ID: LT-30

Double foot for CBR LineTool Item-ID: LT-60

CBR LineTool 100 Item-ID: CBR-LT-100

Second Pull-Unit for CBR LineTool Item-ID: CBR-LT-200

CBR LeverTool Item-ID: CBR-LV-00

Single foot for CBR LeverTool Item-ID LV-30

Double foot for CBR LeverTool Item-ID: LV-60

CBR Pull-Hammers Item-ID CBR-ZH-01 | CBR-ZH-02

CBR Hammers Item-ID: H01-HG| H03-H | H03-V

CBR Earth Clamp Item-ID: CBR-MK-00a

Handle with button Item-ID: CBR-C1-10

Handle without button Item-ID: CBR-C1-14

CBR Gluing-Technology Set Item-ID: MKS-100

CBR GlueTech+ Item-ID: MGT-400

Optionales Zubehör PushPull

PP-036
CBR PushPull Klemme, breit

PP-037
Gummistützfuß

PP-070
Einstellbares Verbindungsrohr, 170 mm

PP-071
Einstellbares Verbindungsrohr, 290 mm

PP-072
L-Form-Bolzen

PP-073
Verbindungsplatte

PP-076
Rohradapter

PP-082
Kette 2 m

PP-081
Kettenverbinder

PP-087
Winkelpad-Set

CZ-190
Ausbeulklatsche, blau

CZ-191
Ausbeulklatsche, rot

Scope of delivery CBR PushPull
Economy kit

CBR-PP-02 CBR PushPull Economy Kit Quantity
PP-034 Clamp 1
PP-035 Universal clamp 1
PP-060 Extension tube 125 mm 1
PP-061 Extension tube 170 mm 1
PP-062 Extension tube 300 mm 1
PP-063 Extension tube 500 mm 1
PP-077 Propeller 1
PP-020 Adjustable body hooks 2
PP-075 Double adapter 2
PP-074 Single adapter 2
PP-039 Bolt 41 mm / Splint 4

Scope of delivery CBR PushPull
Standard Kit

CBR-PP-01 CBR PushPull Standard Kit (Case) Quantity
PP-005 Adapter with external thread 1
PP-006 Adapter with female thread 2
PP-063 Extension tube 500 mm 1
PP-062 Extension tube 300 mm 1
PP-061 Extension tube 170 mm 1
PP-060 Extension tube 125 mm 1
PP-10 CBR Compressed Air Press 1
PP-008 Serrated saddle 1
PP-013 Wedge head 1
PP-014 Pull hook 2
PP-010 Collar toe 1
PP-011 Plunger toe 1
PP-012 Groove adapter 1
PP-007 Rubber buffer 1
PP-009 Support foot 1
PP-086 Bit hook for PushPull 1

Scope of delivery PushPull trolley
37-piece

CBR-PP-00 CBR PushPull System Quantity
PP-034 Clamp 1
PP-035 Universal clamp 1
PP-060 Extension tube 125 mm 2
PP-061 Extension tube 170 mm 2
PP-062 Extension tube 300 mm 2
PP-063 Extension tube 500 mm 2
PP-077 Propeller 1
PP-020 Adjustable body hooks 2
PP-075 Double adapter 2
PP-074 Single adapter 2
PP-039 Bolt 41 mm / Splint 4
PP-005 Adapter with external thread 1
PP-006 Adapter with female thread 2
PP-10 CBR Compressed Air Press 1
PP-008 Serrated saddle 1
PP-013 Wedge head 1
PP-014 Pull hook 2
PP-010 Collar toe 1
PP-011 Plunger toe 1
PP-012 Groove adapter 1
PP-007 Rubber buffer 1
PP-009 Support foot 1
PP-086 Bit hook for PushPull 1
PP-090 Inlay system trolley 1
CBR-PP-020 CBR PushPull system trolley 1

Please write to us